What should a fire stopping label say?
- Every seal labelled and photographed
- BM TRADA / FIRAS-certificated contractors
- Written price before any work
Short answer: enough for a stranger to find the seal in the records and know what it is.
Usually that means a seal or reference number, the product or system used, the fire rating it was fitted to, who fitted it and when.
A made-up example, written the way they tend to look:
Ref FS-3-017. Batt and mastic system. 60 minutes. Fitted by the installer named on the label. Date of fitting. Do not disturb, contact building manager before altering.
The number is the important part. On its own a label proves nothing, because anyone can stick one on. It is useful because FS-3-017 also appears in a record with photos taken before and after, and the record says what goes through the hole.
Where the label goes
On the wall or floor next to the seal, where it can be read without moving anything. In a riser, on the riser wall at each floor. Above a ceiling, on the wall beside the seal, so it can be seen with the tile out.
No label at all
Lots of buildings have seals with no label. That does not mean the seal is bad. It means nobody can show that it is good.
On a survey or an inspection, an unlabelled seal of an unknown product is usually listed as needing work. Sometimes the product can be identified by eye, such as a branded collar. Even then, without a record, nobody can say it was fitted to a tested detail.
Send the page that mentions it, the postcode and the number of floors. We come back with what it needs and a written price.